UK COMPANY SELLING THE MOLD ARMOR PRODUCT RANGE 

Our toughest non-chlorine bleach system available for cleaning, disinfecting and sanitizing the area. Mold Armor Mold & Mildew Stain Removal System contains a proprietary double-action formula. Use both indoors and outdoors, it is bleach free so it can be used on surfaces where chlorine bleach cannot be used such as drywall.

Ideal for use on:
• Tile, Tub, Grout, Shower Curtains, Doors & Sinks
• Painted Decks & Fences
• Stone (except natural marble), cultured marble
• PVC, Vinyl, Plastic
• Drywall, painted wood, painted surfaces, laminates
• Porcelain, Ceramic tile

Directions for Use:
The Mold Armor Mold Removal System comes with one 12 oz. bottle of OxyActivator formula, one 12 oz. bottle of Mold Stain Eliminator and one empty 16 oz. trigger sprayer bottle for mixing and spraying.

To Prepare Formula:
For your safety, it is very important that you wear chemical-resistant gloves and eye protection such as goggles or safety glasses when mixing and using this product.

To use, remove the trigger sprayer from the 16 oz empty bottle. Pour equal parts of OxyBleach and Mold Stain Eliminator into the trigger spray bottle. Replace the trigger spray and swirl the product.

How to Use:
Spray the affected area and let stand for 10 minutes. The formula must remain on the treated area for a minimum of 10 minutes for it to work. After 10 minutes, wipe or scrub the area with a clean cloth or sponge.

DELIVERY TO UK EUROPE AND INTERNATIONALLY

NOW IN STOCK

UK COMPANY SELLING THE MOLD ARMOR PRODUCT RANGE 

Are you concerned about mold in your home, school or office? Even small amounts of mold can cause health problems such as wheezing, sinus congestion and watery eyes. The Mold Armor Do-It-Yourself Mold Test Kit tests for the presence of mold within 48 hours. It is safe, easy to use and a simple way to protect your family from toxic and other molds.

The kit can be used either indoors or outdoors. You will need one mold test kit for each area of concern. An optional Mail-In lab analysis is available which identifies the type of mold present.

How to Prepare the Petri Dish
Remove the petri dish from the plastic bag and place it on a level surface with the lid side up. Remove the lid of the petri dish and pour the mold growth medium into the dish bottom. Replace the lid and swirl gently until the bottom is completely covered. Allow to gel for one hour on a level surface.

INDOOR AIR QUALITY TEST METHOD

  
Place the prepared petri dish on a level surface in the location where you want to test for mold. Remove the lid of the petri dish and leave it open to the environment for 1 hour. After one hour replace the lid and allow to incubate for 48 hours. If there is no mold present within 48 hours, re-check the dish at 72 hours and 96 hours to be sure that no slow growing mold were overlooked. If mold growth is present after the incubation period, you may send the petri dish to our lab for analysis on the type of mold present. If no mold is present after 72 hours then no mold was detected.

HVAC AIR SAMPLING (TAPE IS REQUIRED) 

    
Mold can also come from you heating and air conditioning unit. To test, locate the air exhaust vent which is furthest away from the furnace. After preparing the petri dish, remove the lid and tape the open dish against the open air vent. Close all of the remaining air vents that are on the system. Turn the system fan on high for a 10 minute period, allowing forced air to hit the inside surface of the petri dish. After 10 minutes remove the petri dish, replace the lid, and allow to incubate for 48 hours. If no mold is present after 48 hours, re-check the dish at 72 hours and 96 hour to be sure that no slow growing mold were overlooked. If mold growth is present you may send the petri dish to our lab for analysis on they type of mold you have. If no mold is present after 72 hours, then no mold was detected.

VISUAL SAMPLING METHOD

Locate the visual mold growth. Take the enclosed sterile swab and wipe the tip across the visual mold growth. Be sure the mold adheres to the swab. Open the small bottle of mold growth medium. Insert the swab with mold on it and stir it in the mold medium. Pour the mold growth medium into the petri dish. Allow to gel on a level surface for 48 hours. IN ORDER TO PROVIDE YOU WITH THE TYPE OF MOLD GROWING YOU MUST SEND THE PETRI DISH WITH THE MOLD GROWTH AND THE STERILE SWAB TO A LAB FOR ANAYISIS.

DELIVERY TO UK EUROPE AND INTERNATIONALLY

Dust mite and cock roach droppings are among the most potent allergens. Cat saliva triggers asthma and allergic reactions. Allergen Neutralizer from Mold Armor neutralizes the allergens from dust mites, cock roach dropping and cat saliva. A non-toxic, botanical formula, Mold Armor Allergen Neutralizer contains no perfumes or VOC’s and is proven to denature the allergens found in dust mites, cockroach droppings, dog dander and cat saliva. It is biodegradable and safe for home, family and pets.

Ideal for use on:
• Clothing
• Bedding
• Upholstery
• Drapes
• Rugs
• Fabrics
• Lawn furniture
• Umbrellas
• Wallpaper
• Mini-blinds

DELIVERY TO UK / EUROPE AND INTERNATIONALLY

NOW IN STOCK